Changsha ENYU Engineering Equipments Co. Ltd.
Changsha ENYU Engineering Equipments Co. Ltd.
Add to Cart
Introduction of DTH Drill Rods/ Pipes/ Tubes:
Drill pipes that are used in applications such as DTH/ DTHR/ DR basically comprise of a steel pipe with a pin at one end and a box on the other. The job of the drill pipe is to transmit rotational torque and thrust from the drill rig rotary head to down hole drilling tools.
According to different application, different diameters of drill tubes are needed, basically, smaller DTH hammers need smaller DTH drill tubes, vice versa. Usually we are offering 50mm, 60mm, 76mm, 89mm, 95mm, 102mm, 114mm, 127mm, 140mm, 159mm.
Specification of DTH Drill Rods/ Pipes/ Tubes:
| Outer Diameter
| Thread | Wall Thickness (mm) | Length (mm) | |
|---|---|---|---|---|
| mm | inch | |||
| 76 | 3 | API 2 3/8 REG API 2 7/8 REG API 3 1/2 REG API 4 1/2 REG API 2 3/8 IF API 2 7/8 IF API 3 1/2 IF API 4 1/2 IF BECO 3 1/2" | 4.0/ 6.3 | 1000~6000 |
| 89 | 3 1/2 | 4.0/ 6.3/ 8.8 | 1000~6000 | |
| 102 | 4 | 6.3/ 8.8 | 4000~6000 | |
| 114 | 4 1/2 | 6.3/ 12.5 | 4000~9000 | |
| 127 | 5 | 6.3/ 12.5/ 19 | 4000~9000 | |
| 133 | 5 1/4 | 6.3/ 12.5/ 19 | 4000~9000 | |
| 140 | 5 1/2 | 8.8/ 12.5/ 19 | 4000~9000 | |
